Tecnolfon® N215/U
Fluoroelastomer (FKM)
Tecnoflon® N 215/U is a very low viscosity fluoroelastomer copolymer. Tecnoflon® N 215/U is intended for blending with other polymers of the Tecnoflon® family to achieve the desired viscosity. It is also intended for high concentration solution applications, such as dip coated items, fabric coatings and spray coating. Tecnoflon® N 215/U can be mixed in the same way as all the other Tecnoflon® grades and can be used in any application requiring either very low compound viscosity or "low viscosity", highly loaded high hardness compounds. Tecnoflon® N 215/U does not contain curatives: therefore the proper levels of VANAX® FC-20 Granules and VANAX® FC-30 Granules must be added to achieve the required properties. It can be also cured with diamine based systems.
Some of the unique properties of Tecnoflon® N 215/U are:
Solution applications
• Excellent pot life
• Very low Brookfield viscosity
• Excellent adhesion to substrates Dry applications
• Superior mold flow
• Low compound viscosity
• Good compression set
Tecnoflon® N 215/U can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two roll mills or internal mixers. Compounds based on Tecnoflon® N 215/U can be dispersed in solvents for coating applications. Finished goods can be produced by a variety of rubber processing methods.
Some of the unique properties of Tecnoflon® N 215/U are:
Solution applications
• Excellent pot life
• Very low Brookfield viscosity
• Excellent adhesion to substrates Dry applications
• Superior mold flow
• Low compound viscosity
• Good compression set
Tecnoflon® N 215/U can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two roll mills or internal mixers. Compounds based on Tecnoflon® N 215/U can be dispersed in solvents for coating applications. Finished goods can be produced by a variety of rubber processing methods.
Thank you for Requesting a Quote.
A Vanderbilt associate will contact you shortly.
Something went wrong with your submission.
Please refresh the page and try again.