Dithiocarbamate Accelerators
C.A.S.E.
Product Category:
Dithiocarbamate Accelerators
Use Our Chemicals Product Finder
Chemicals Product Finder
-
Petroleum
- Engine Oil Additives
- Grease Additives
- Driveline Additives
- Metal Working Fluid Additives
- Gear Oil Additives
- Turbine Oil Additives
- Hydraulic Oil Additives
- Compressor Oil Additives
- Food Grades
- Ester Base Stocks
-
Rubber
- Accelerators and Vulcanization Agents
- Antidegradants
- Mineral Fillers
- Plasticizers and Processing Aids
- Tackifiers
- Polymer Modifiers
-
Rubber Polymers
- Exxon™ Butyl Polymers and Halogenated Butyl Rubber (BIIR CIIR)
- Neoprene Polychloroprene (CR)
- Vistalon™ Ethylene Propylene Diene (EPDM) Rubber
-
Tecnoflon® fluoroelastomer (FKM) and perfluoroelastomer (FFKM)
- Raw fluoroelastomer copolymers – N series
- Cure incorporated fluoroelastomer copolymers – FOR series, 66% Fl
- Raw fluoroelastomer terpolymers – T & TN series
- Cure incorporated fluoroelastomer terpolymers – FOR & FOR TF series
- Peroxide curable fluoroelastomer terpolymers – P series
- Low temperature peroxide curable fluoroelastomers – PL series
- Very low temperature peroxide curable fluoroelastomers – VPL series
- Perfluoroelastomers – PFR series
- VAROX™ Organic Peroxide Crosslinking Agents
- Miscellaneous
- The Vanderbilt Rubber Handbook and CD
- The Vanderbilt Latex Handbook
- Plastics
- Polyurethanes
- C.A.S.E.
Adhesives are expected to withstand many stresses and strains in numerous applications. Crosslinking the polymer not only increases the overall strength of the adhesive, but can be especially useful in increasing the cohesive strength of the finished product.
METHYL ZIMATE® Dustless
Accelerator
METHYL ZIMATE Dustles, zinc dimethyldithiocarbamate, is used in BR, EPDM, IR, NBR, NR, SBR polymers and their latexes as a fast-curing primary or secondary ultra- accelerator.
METHYL CUMATE® (CuDMC) Powder
Accelerator
Ultra accelerator for high-speed vulcanization of EPDM, IIR, and SBR polymers.
BUTYL NAMATE™
Accelerator
This product imparts fast precure and curing rates in NR and SR latexes, and is recommended for use where long compound shelf life is not required.
BUTYL EIGHT®
Accelerator
Accelerator for room temperature vulcanization of spread solvent cements, calendered and extruded stocks.
AMYL ZIMATE®
Accelerator
A liquid dithiocarbamate recommended for improved dynamic properties in natural and synthetic rubbers.
BUTYL ZIMATE® Slurry
Accelerator
A 50% active ultra-fast accelerator for sulfur cured latex polymers.
ETHYL ZIMATE® Dustless
Accelerator
ETHYL ZIMATE Dustless, zinc diethyldithiocarbamate, is used in BR, EPDM, IR, NBR, NR, SBR polymers and their latexes as a fast-curing primary or secondary ultra- accelerator.