SpectraSyn® Polymer Modifier
Rubber
Product Category:
SpectraSyn® Polymer Modifier
Use Our Chemicals Product Finder
Chemicals Product Finder
-
Petroleum
- Engine Oil Additives
- Grease Additives
- Driveline Additives
- Metal Working Fluid Additives
- Gear Oil Additives
- Turbine Oil Additives
- Hydraulic Oil Additives
- Compressor Oil Additives
- Food Grades
- Ester Base Stocks
-
Rubber
- Accelerators and Vulcanization Agents
- Antidegradants
- Mineral Fillers
- Plasticizers and Processing Aids
- Tackifiers
- Polymer Modifiers
-
Rubber Polymers
- Exxon™ Butyl Polymers and Halogenated Butyl Rubber (BIIR CIIR)
- Neoprene Polychloroprene (CR)
- Vistalon™ Ethylene Propylene Diene (EPDM) Rubber
-
Tecnoflon® fluoroelastomer (FKM) and perfluoroelastomer (FFKM)
- Raw fluoroelastomer copolymers – N series
- Cure incorporated fluoroelastomer copolymers – FOR series, 66% Fl
- Raw fluoroelastomer terpolymers – T & TN series
- Cure incorporated fluoroelastomer terpolymers – FOR & FOR TF series
- Peroxide curable fluoroelastomer terpolymers – P series
- Low temperature peroxide curable fluoroelastomers – PL series
- Very low temperature peroxide curable fluoroelastomers – VPL series
- Perfluoroelastomers – PFR series
- VAROX™ Organic Peroxide Crosslinking Agents
- Miscellaneous
- The Vanderbilt Rubber Handbook and CD
- The Vanderbilt Latex Handbook
- Plastics
- Polyurethanes
- C.A.S.E.
SpectraSyn™ is a specialty plasticizer for technical applications requiring a wide range of service temperature and improved mechanical properties. The unique chemistry of SpectraSyn may enable formulators to elevate product performance and extend the product service life of EPDM and polyolefin elastomer compounds. Key benefits include improved processing,higher crosslink density,lower compression and tension set, increased permanence and enhanced low- and high- temperature performance. Compound viscosity reduction efficiency is about 130%, which translates to about 70% replacement parts of SpectraSyn vs. Sunpar 2280 for a similar Mooney. The Pour Points for the SpectraSyn grades range from -66°C to -27°C, which is significantly lower than the -9°C for Sunpar 2280.
SPECTRASYN™ 100
Polymer Modifier
Specialty hydrocarbon fluid polymer modifier with a low Tg of -72°C.
SPECTRASYN™ 40
Polymer Modifier
Specialty hydrocarbon fluid polymer modifier with a low Tg of -74°C.