Product Category:
Clay
Use Our Chemicals Product Finder
Chemicals Product Finder
-
Petroleum
- Engine Oil Additives
- Grease Additives
- Driveline Additives
- Metal Working Fluid Additives
- Gear Oil Additives
- Turbine Oil Additives
- Hydraulic Oil Additives
- Compressor Oil Additives
- Food Grades
-
Rubber
- Accelerators and Vulcanization Agents
- Antidegradants
- Mineral Fillers
- Plasticizers and Processing Aids
- Tackifiers
- Polymer Modifiers
-
Rubber Polymers
- Exxon™ Butyl Polymers and Halogenated Butyl Rubber (BIIR CIIR)
- Neoprene Polychloroprene (CR)
- Vistalon™ Ethylene Propylene Diene (EPDM) Rubber
-
Tecnoflon® fluoroelastomer (FKM) and perfluoroelastomer (FFKM)
- Raw fluoroelastomer copolymers – N series
- Cure incorporated fluoroelastomer copolymers – FOR series, 66% Fl
- Raw fluoroelastomer terpolymers – T & TN series
- Cure incorporated fluoroelastomer terpolymers – FOR & FOR TF series
- Peroxide curable fluoroelastomer terpolymers – P series
- Low temperature peroxide curable fluoroelastomers – PL series
- Very low temperature peroxide curable fluoroelastomers – VPL series
- Perfluoroelastomers – PFR series
- VAROX™ Organic Peroxide Crosslinking Agents
- Miscellaneous
- The Vanderbilt Rubber Handbook and CD
- The Vanderbilt Latex Handbook
- Plastics
- Polyurethanes
- C.A.S.E.
The addition of the correct Vanderbilt mineral filler to an adhesive compound not only decreases product cost but can also increase its physical properties. The addition of mineral fillers can increase the viscosity, opacity and weight of the compound, reduce shrinkage and cracking, and increase the speed of melting and cooling in hot melts. The use of mineral fillers will also affect physical strength and vibration damping.